I Home I About Us I News I Gallery I Fact Sheets I FAQ I Sitemap I Contact Us I
   

VERTICAL STANDARD

Mitten Vinyl Cladding in vertical profile is used for walls, gables and under eaves (soffit).  Because it never needs painting, Mitten Vinyl vertical cladding is particularly suited for ‘hard to maintain’ areas, such as high roof gables, second storey additions and infills. Vertical cladding is also used for ceiling linings under porches and verandahs. Read more about Eaves.

Lightweight construction makes it easy to work with at height
Long lifespan and reduced maintenance on ‘hard to reach’ areas
Clad under eaves to eliminate the need to paint or maintain – suitable for square or mitred corner finish
Vented panels available for eaves and underfloor area
Superior wind resistance for high and inaccessible areas
Lifetime Warranty – adds peace of mind
Lightly textured brush finish in a range of 10 colours
Install on gable ends for contrasting finish
254mm wide double profile and 3.66metre length
Suitable for vertical installation on walls for a striking modern look
 
Complete your home with a cladding system that is economical, will not rot and never needs to be painted. Contact us for more information.
 
Frost Bone Ivory Sandalwood Satin Grey
 
 
 
 
 
Golden Sand Mist Green Lite Maple Brownstone Ash
 
 
 
 
 
Please note: Colour samples shown will vary on different monitors. Please contact us for colour samples to be sent to you.
 

      All copyright Mitten Vinyl       Australia 2009

      Site by: b.b.advertising
Mitten Vinyl Australia · 180 Beaconsfield Street · Milperra NSW 2214 · Australia
Phone 1300 66 55 43 or 02 9774 5366 · Fax 02 9774 5843